Custom Frame Work
Frame notch, step, notch, c notch, whatever you want to call it…You need one for your lowered truck! If you have lowered your truck and don’t have a notch kit installed than you are probably “bottoming out” with a huge BANG because your rear axle is slamming against your rear frame rails. When you lower your truck suspension, the axle travels upwards closer to the frame rails.
With a notch kit, you install the notches on the frame rail directly above your axle. Then you cut the frame rail which will give you the clearance you need for your axle to be able to travel upwards. This eliminates bottoming out on your frame rail because the axle can now travel all the way to the bottom of the notch.
Custom Speaker Boxes
In a perfect world, your custom speaker box would be just like the rest of your custom stereo system. It would fit perfectly into your vehicle and project sound with no interruption of flow. Speaker wires would never work loose because of bumpy roads and CDs would always sound like you were standing in the studio.
While we can’t do anything about the bumpy roads, we can provide you with the perfect speaker box, guaranteed to make your speakers perform at their peak. To achieve that feat, you need a custom speaker box for each of your speakers.
Think custom isn’t possible? Think again. All you have to do is provide us with some basic information and let us do the rest. And we’re not talking about a square box that will end up as a foot rest on your rear floor board. Our custom speaker box is designed for your vehicle, your speakers and your lifestyle.
If you think speaker placement isn’t vital, toss a couple of speakers in the back seat of your car and take a ride across town. Projecting the sound correctly is almost as important as choosing the right speakers. Even if you’ve outfitted your vehicle with the most awesome components imaginable, it’s not going to rock your world unless each component is placed for maximum benefit. Our custom speaker boxes will allow you to do just that.